1 00:00:00,230 --> 00:00:02,820 - [Narrator] Post Attack Reconnaissance, or PAR teams, 2 00:00:02,820 --> 00:00:05,220 are the first surveyors after an attack. 3 00:00:05,220 --> 00:00:07,090 The duties of the PAR team, however, 4 00:00:07,090 --> 00:00:09,080 start before attacks begin. 5 00:00:09,080 --> 00:00:12,530 Prior to any attacks, the PAR team must set up stanchions 6 00:00:12,530 --> 00:00:15,060 with M8 Chemical Agent Detector Paper. 7 00:00:15,060 --> 00:00:16,540 Ensure the stanchions are set up 8 00:00:16,540 --> 00:00:18,340 away from buildings and trees. 9 00:00:18,340 --> 00:00:20,970 Date and time the paper with pencil only. 10 00:00:20,970 --> 00:00:23,840 Once stanchions are established, PAR teams take cover 11 00:00:23,840 --> 00:00:26,090 until released by the unit control center. 12 00:00:26,090 --> 00:00:28,780 Once released, PAR teams will use the rod established 13 00:00:28,780 --> 00:00:30,240 by their unit control center 14 00:00:30,240 --> 00:00:33,370 and conduct a thorough examination of their area. 15 00:00:33,370 --> 00:00:37,620 Any unexploded ordnance, or UXOs, casualties, damages, 16 00:00:37,620 --> 00:00:40,030 or contaminations must be immediately reported 17 00:00:40,030 --> 00:00:41,990 to the unit control center. 18 00:00:41,990 --> 00:00:43,750 If a UXO is discovered, 19 00:00:43,750 --> 00:00:47,260 do not transmit by handheld radio within 25 feet, 20 00:00:47,260 --> 00:00:50,390 or by vehicle-mounted radio within 100 feet. 21 00:00:50,390 --> 00:00:52,250 Provide as much information as possible 22 00:00:52,250 --> 00:00:55,220 to properly identify the UXO. 23 00:00:55,220 --> 00:00:57,980 If an M8 stanchion is within the UXO cordon, 24 00:00:57,980 --> 00:01:01,650 do not check these posts and instead notify the UCC. 25 00:01:01,650 --> 00:01:05,360 Set the initial UXO marker down and continue the sweep. 26 00:01:05,360 --> 00:01:06,790 Once the sweep is completed, 27 00:01:06,790 --> 00:01:10,660 return and cordon the UXO as required in the Airman's Manual 28 00:01:10,660 --> 00:01:12,680 The PAR team's goal is to complete the sweep 29 00:01:12,680 --> 00:01:15,030 as quickly and accurately as possible. 30 00:01:15,030 --> 00:01:18,210 Your first sweep should take roughly 15 minutes. 31 00:01:18,210 --> 00:01:20,400 After completing the initial sweep, 32 00:01:20,400 --> 00:01:24,050 complete a second sweep to change out all M8 paper. 33 00:01:24,050 --> 00:01:26,863 Treat used paper as contaminated waste.