An official website of the United States government
A .mil website belongs to an official U.S. Department of Defense organization in the United States.
A lock (lock ) or https:// means you’ve safely connected to the .mil website. Share sensitive information only on official, secure websites.

Clear Filters | 441 - 460 of 604 results

U.S. Congressmen speaks with Osan’s Airmen

Col. Andrew Hansen, 51st Fighter Wing commander, gives an overview of Osan’s aircraft to U.S. Rep. Fred Upton at Osan Air Base, Republic of Korea, June 30, 2016. Upton and other congressmen visited Osan to better understand the U.S. military presence on the Korean Peninsula. In addition to seeing Osan’s aircraft, the congressmen had lunch with Airmen from their respective states. Reps. Morgan Griffith, Pete Olson, Greg Walden, John Shimkus, Edward Whitfield and Fred Upton were in attendance. (U.S. Air Force photo by Staff Sgt. Jonathan Steffen/Released)
Details Download

U.S. Congressmen speaks with Osan’s Airmen

U.S. congressmen speak with 51st Fighter Wing Airmen during a base visit at Osan Air Base, Republic of Korea, June 30, 2016. The congressmen visited Osan to meet with Airmen to better understand the mission of the base. In addition to seeing Osan’s aircraft, the congressmen had lunch with Airmen from their respective states. Reps. Morgan Griffith, Pete Olson, Greg Walden, John Shimkus, Edward Whitfield and Fred Upton were in attendance. (U.S. Air Force photo by Staff Sgt. Jonathan Steffen/Released)
Details Download

Fabrication Flight forges parts for aircraft readiness

Senior Airman Nathan Talamantez, 51st Maintenance Squadron non-destructive inspection journeyman, inspects a brake housing for a cracks at Osan Air Base, Republic of Korea, June 28, 2016. Talamantez identifies damages aircraft parts before returning them to be repaired or replaced. Talamantez is assigned to the non-destructive inspection shop and is part of the fabrication flight which also has structural maintenance shop and metals technology. Fabrication flight Airmen identify, repair and build parts to working order so that Osan airframes are ready to fight tonight. (U.S. Air Force photo by Staff Sgt. Jonathan Steffen/Released)
Details Download

Fabrication Flight forges parts for aircraft readiness

Senior Airman Nathan Talamantez, 51st Maintenance Squadron non-destructive inspection journeyman, pulls out a brake housing covered in florescent oil penetrate at Osan Air Base, Republic of Korea, June 28, 2016. Talamantez will use florescent oil penetrate to identify cracks in aircraft parts. Talamantez is assigned to the non-destructive inspection shop and is part of the fabrication flight which also has structural maintenance shop and metals technology. Fabrication flight Airmen identify, repair and build parts to working order so that Osan airframes are ready to fight tonight. (U.S. Air Force photo by Staff Sgt. Jonathan Steffen/Released)
Details Download

Fabrication Flight forges parts for aircraft readiness

Senior Airman Richard Forney, 51st Maintenance Squadron aircraft metals technology journeyman, welds a sheet of metal at Osan Air Base, Republic of Korea, June 28, 2016. Forney builds custom parts for aircraft and supporting equipment. Forney is assigned to the metals technology shop and is part of the fabrication flight, which also has non-destructive inspection and structural maintenance. Fabrication flight Airmen identify, repair and build parts to working order so that Osan airframes are ready to fight tonight. (U.S. Air Force photo by Staff Sgt. Jonathan Steffen/Released)
Details Download

Fabrication Flight forges parts for aircraft readiness

Airman Jared Chappell, 51st Maintenance Squadron aircraft structural maintenance, drills holes into an A-10 Thunderbolt II pylon at Osan Air Base, Republic of Korea, June 28, 2016. Chappell was repairing a crack in the pylon to return it to full mission capability. Chappell is assigned to structural maintenance shop and is part of the fabrication flight which also has non-destructive inspection and metals technology. Fabrication flight Airmen identify, repair and build parts to working order so that Osan airframes are ready to fight tonight. (U.S. Air Force photo by Staff Sgt. Jonathan Steffen/Released)
Details Download

Fabrication Flight forges parts for aircraft readiness

Airman Jared Chappell, 51st Maintenance Squadron aircraft structural maintenance, paints an A-10 Thunderbolt II pylon after repairing a crack at Osan Air Base, Republic of Korea, June 28, 2016. Chappell was repairing a crack in the pylon to return it to full mission capability. Chappell is assigned to structural maintenance shop and is part of the fabrication flight which also has non-destructive inspection and metals technology. Fabrication flight Airmen identify, repair and build parts to working order so that Osan airframes are ready to fight tonight. (U.S. Air Force photo by Staff Sgt. Jonathan Steffen/Released)
Details Download

Fabrication Flight forges parts for aircraft readiness

Tech. Sgt. Jesse Mcleod, 51st Maintenance Squadron aircrafts metals technology craftsman, operates a computer numeric control machine at Osan Air Base, Republic of Korea, June 28, 2016. The CNC machine is designed to make custom aircraft parts. Mcleod is assigned to the metals technology shop and is part of the fabrication flight, which also has non-destructive inspection and structural maintenance. Fabrication flight Airmen identify, repair and build parts to working order so that Osan airframes are ready to fight tonight. (U.S. Air Force photo by Staff Sgt. Jonathan Steffen/Released)
Details Download

25th AMU Airmen keep Thunderbolts flying

Senior Airmen Jonathan Wirkkala, left, 25th Aircraft Maintenance Unit avionics systems technician, and Jarred Sozzi, 25th Aircraft Maintenance Unit electronic and environmental systems technician, pose in front of an A-10 Thunderbolt II at Osan Air Base, Republic of Korea, June 24, 2016. The two maintenance Airmen were life-long fans of the A-10, leading them to choose careers working on the aircraft after enlisting in the Air Force. (U.S. Air Force photo by Senior Airman Victor J. Caputo/Released)
Details Download

25th AMU Airmen keep Thunderbolts flying

Senior Airman Jarred Sozzi, 25th Aircraft Maintenance Unit electronic and environmental systems technician, reads through a technical order while placing a weight-on-wheel harness and switch on an A-10 Thunderbolt II at Osan Air Base, Republic of Korea, June 24, 2016. Sozzi grew up admiring the A-10 before joining the Air Force, ultimately choosing to perform maintenance on his favorite aircraft for a living. (U.S. Air Force photo by Senior Airman Victor J. Caputo/Released)
Details Download

Bulldogs integrate with Mustangs

Pilots assigned to the 179th Expeditionary Fighter Squadron wait for their post-flight, end-of-runway inspection before taxing back to their parking areas, June 21, 2016, at Osan Air Base, Republic of Korea. The pilots, who are deployed from the Minnesota Air National Guard’s 148th Fighter Wing, landed after successfully completing a training sortie. (U.S. Air Force photo by Senior Airman Victor J. Caputo/Released)
Details Download

Bulldogs integrate with Mustangs

An F-16 Fighting Falcon assigned to the Minnesota Air National Guard’s 148th Fighter Wing, taxis into an inspection area, June 21, 2016, at Osan Air Base, Republic of Korea. The Airmen and F-16s from the 148th FW deployed to Osan as part of a Theater Security Package for U.S. Pacific Command and Pacific Air Forces. (U.S. Air Force photo by Senior Airman Victor J. Caputo/Released)
Details Download

Bulldogs integrate with Mustangs

Airmen assigned to the 148th Aircraft Maintenance Unit push an F-16 Fighting Falcon into a hardened aircraft shelter, June 21, 2016, at Osan Air Base, Republic of Korea. The Airmen and F-16s from the Minnesota Air National Guard’s 148th Fighter Wing deployed to Osan as part of a Theater Security Package for U.S. Pacific Command and Pacific Air Forces. (U.S. Air Force photo by Senior Airman Victor J. Caputo/Released)
Details Download

Bulldogs integrate with Mustangs

Tech. Sgt. Adam Skadsberg, 148th Aircraft Maintenance Unit weapons one-man, signals to an F-16 Fighting Falcon pilot, June 21, 2016, at Osan Air Base, Republic of Korea. Skadsberg was part of a three-man crew performing the inspection, and was responsible for communicating with the pilots while his teammates inspected each aircraft. (U.S. Air Force photo by Senior Airman Victor J. Caputo/Released)
Details Download

Bulldogs integrate with Mustangs

F-16 Fighting Falcons assigned to the Minnesota Air National Guard’s 148th Fighter Wing taxi off the runway after a training sortie, June 21, 2016, at Osan Air Base, Republic of Korea. The Airmen and F-16s from the 148th FW deployed to Osan as part of a Theater Security Package for U.S. Pacific Command and Pacific Air Forces. (U.S. Air Force photo by Senior Airman Victor J. Caputo/Released)
Details Download

ACC command chief visits Osan

Master Sgt. Amanda White, right, 5th Reconnaissance Squadron aircrew flight equipment supervisor, explains her section’s responsibilities in preparing U-2 Dragon Lady pilots for a flight to Chief Master Sgt. Steve McDonald, Air Combat Command command chief, at Osan Air Base, Republic of Korea, June 16, 2016. The AFE Airmen help U-2 pilots put on their pressurized flight suit, connect them to an oxygen machine and run a pressurization test to ensure there are no malfunctions that could cause an in-flight emergency. (U.S. Air Force photo by Senior Airman Victor J. Caputo/Released)
Details Download

ACC command chief visits Osan

Chief Master Sgt. Steve McDonald, Air Combat Command command chief, hands a helmet to Lt. Col. Todd Larsen, 5th Reconnaissance Squadron commander, during preflight preparations at Osan Air Base, Republic of Korea, June 16, 2016. McDonald toured several geographically-separated ACC units at Osan, including the 5th RS, which is part of the 9th Reconnaissance Wing at Beale Air Force Base, Calif. (U.S. Air Force photo by Senior Airman Victor J. Caputo/Released)
Details Download

ACC command chief visits Osan

Chief Master Sgt. Steve McDonald, Air Combat Command command chief, speaks with Staff Sgt. Dongpyo Yi, 694th Intelligence Surveillance and Reconnaissance Group airman dorm leader, about the common rooms in the group’s dormitories at Osan Air Base, Republic of Korea, June 16, 2016. McDonald visited Osan to gain a better understanding of the 694th ISRG mission, how Airmen assigned to the unit accomplish their immediate tasks and the conditions of their living facilities. (U.S. Air Force photo by Senior Airman Victor J. Caputo/Released)
Details Download

ACC command chief visits Osan

Chief Master Sgt. Steve McDonald, Air Combat Command command chief, draws a picture on a 694th Intelligence Surveillance and Reconnaissance Group Airman’s dormitory door at Osan Air Base, Republic of Korea, June 16, 2016. Part of McDonald’s visit to Osan included a tour of one of the 694th IRSG’s dorms to see the living conditions of its Airmen. (U.S. Air Force photo by Senior Airman Victor J. Caputo/Released)
Details Download

36 FS, ROKAF pilots partner for Buddy Wing 16-5

U.S. Air Force Capt. Thomas Nichols, 51st Operation Support Squadron electronic combat pilot, thanks Republic of Korea air force pilots for the training opportunity during Buddy Wing 16-5 at Osan Air Force, Republic of Korea, June 10, 2016. The purpose of the Buddy Wing Program is to execute joint tactics, exchange ideas and improve interoperability between the USAF and ROKAF pilots, maintainers and support personnel. (U.S. Air Force photo by Staff Sgt. Jonathan Steffen)
Details Download